Switches

1. no name yet - let’s call it neon first
2. anti-wobble top case
3. 58g bottom out
4. dual-stage 20mm springs
5. blended nylon housing
6. special mixed stem
7. early bottom out with long stem
8. new manu - not JWK

Please go thru the build guide, some key steps:

1. opening the case
2. insert the FFC cable
3. connect the FFC cable to daughterboard
4. closing the case

Aesthetics highlights - B-roll suggestions

1. the rear side - the “trunk”
   1. bottom and rear sides are glossy pvd
   2. left and right are matte, sandblasted pvd
   3. film is re-usable, add some water on the trunk to help the application
2. the connection/transition/contrast

   1. front side, between top case and weight

      

   2. from trunk to weight, same color, different texture and technique

   3. different sides of the trunk, same idea

      

   4. rear side and the corners, from top to trunk

      

Controversial points

1. not enough flex
   1. space under PCB is quite limited - visible flex is minimal
   2. whole typing experience is bouncy instead of soft, users would be able to see the vibration like spring mattress instead of trampoline
2. sandblasted pvd easily gets dirty
   1. can be wiped off with erasers