Official website: qwertykeys.com Official Discord: discord.gg/qwertykeys Official Instagram: @qwertykey_official
key points: 1. push the clips away from the bottom case to unlock; 2. lift the top case after unlock to remove top case; 3. slide in the front clips first when installing; 4. rubber feet are asymmetric, make sure to use the correct rubber feet else it won’t go in
<aside> 💡 1. Qk Config QK65v2 PCBs are not compatible with VIA and VIAL. Please use QK Config instead.
2. FN key The key on the left of the ← key is either FN or MO(1). Unlike other keys, it will not register in the key tester. To test it, press FN+Tab and see if you can switch between different connectivity modes.
</aside>
<aside> ‼️ Always support the socket firmly from the back (S area) while you're installing switches. Failure to do so can result in your hotswap socket getting pushed off from the solder pad (X area), and the socket will no longer work. Based on your soldering knowledge, you may attempt to fix it at your own discretion. Qwertykeys and all of our vendors will not replace parts damaged by customers’ mishandling.
Hotswap PCB that is no-longer functioning because of the socket issue
</aside>
<aside> ⚠️ Before assembling the keyboard, please thoroughly inspect all the content for any external imperfections or parts damage. If you find any imperfections that exceed the quality control (QC) standard, please contact us via Discord after-sale ticket or email.
Please note that we will not be responsible for any flaws or quality issues discovered after the building process has commenced. Additionally, we will not provide replacement parts for any missing components reported more than 30 days after the delivery date.
</aside>