<aside> 📌 Please carefully follow this instruction - we are not responsible for any damage caused if the guide was ignored during building.

The unit demonstrated in the build guide is an engineering sample which does not represent the final product in terms of color, quality and design.

Please turn on the camera and record the unboxing in case of missing/scuffed parts.

The unit in the demo is a prototype that does not represent the final color and the quality.

</aside>

Content list

Keyboard
- top case, bottom case and weight
- 8x leaf-spring installed on the bottom case
- cloth wrap
- silicone LED diffuser and blocker (packed in a bag)
- 2x short + 1x long rubber feet
- 8x rubber nails
- 8x rubber rings
- Screw - the last two lines come installed
  - 6x Hex socket M2*6mm for bottom case (outer case fixation)
  - 8x Hex countersunk screws M2*3mm (hotswap plates, not installed)
  - 8x Hex cap head screws M2*3mm (hotswap PCBs, not installed)
  - 8x studs M2*3.5mm (hotswap PCB&plates, not installed)
  - 20x Hex socket head M2*4mm for internals (which you should never remove)
  - 4x Hex countersunk screws M2*5mm (weight)
PCB
- 1x PE sheet
- 1x plate Poron foam and case Poron foam
Daughterboard
- with a FFC cable
- two screws
Plate (FR4 shown in picture)
- EVA sticker to cover the gaps between keycaps
Stabilizers
- 5x 2u wires and wire holders (black rubber)
- 10x housings, stems, screws, stab pads and washers
Keyboard carry case
Precision Screwdriver - H1.5(as gift, no make up or replacement)

Preparation

Vial - download it here
Switches
1. lube and filmed (optional)
Stabs
1. you can lube and put them aside prior building
USB-c cable
H1.5 bit/screwdriver/allen key
A pair of thin tips tweezers - probably a must
Keycap set
1. bottom row needs 4x 1.25u, 1x 2.25u and 1x 2.75u keycaps
2. 1.75u shift for the right shift and three keycaps for the top left function area